Search results

This paper aims to focus on an experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling (FDM) technique of additive manufacturing. The fabricated parts of acrylonitrile butadiene styrene (ABS) material have pyramidal and conical features. Influence of five process parameters of FDM, namely, layer thickness, wall print speed, build orientation, wall thickness and extrusion temperature is studied on response characteristics. Furthermore, regression models for responses are developed and significant process parameters are optimized.

Comprehensive experimental study is performed using response surface methodology. Analysis of variance is used to investigate the influence of process parameters on surface roughness, dimensional accuracy and time of fabrication in both outer pyramidal and inner conical regions of part. Furthermore, a multi-response optimization using desirability function is performed to minimize surface roughness, improve dimensional accuracy and minimize time of fabrication of parts.

It is found that layer thickness and build orientation are significant process parameters for surface roughness of parts. Surface roughness increases with increase in layer thickness, while it decreases initially and then increases with increase in build orientation. Layer thickness, wall print speed and build orientation are significant process parameters for dimensional accuracy of FDM parts. For the time of fabrication, layer thickness and build orientation are found as significant process parameters. Based on the analysis, statistical non-linear quadratic models are developed to predict surface roughness, dimensional accuracy and time of fabrication. Optimization of process parameters is also performed using desirability function.

The present study is restricted to the parts of ABS material with pyramidal and conical features only fabricated on FDM machine with delta configuration.

From the critical review of literature it is found that some researchers have made to study the influence of few process parameters on surface roughness, dimensional accuracy and time of fabrication of simple geometrical parts. Also, regression models and optimization of process parameters has been performed for simple parts. The present work is focussed on studying all these aspects in complicated geometrical parts with pyramidal and conical features.

This paper aims to focus on studying the influence of gradient parameters, namely, thickness coefficient, length coefficient and height ratio of auxetic structure on responses such as strength, stiffness and specific energy absorption (SEA) under compressive loading. Optimization of significant parameters is also performed to maximize responses. Further, efforts have also been made to develop regression models for strength, stiffness and SEA of auxetic structure.

Central composite design of response surface methodology is used for planning experiments. Auxetic structures of acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) materials are fabricated by the material extrusion (ME) technique of additive manufacturing. Fabricated structures are tested under in-plane uniaxial compressive loading. Grey relational analysis is used for the optimization of gradient parameters of the unit cell of auxetic structure to maximize responses and minimize weight and time of fabrication.

From the analysis of variance of experimental data, it is found that the compressive strength of auxetic structures increases with a decrease in length coefficient and height ratio. In the case of ABS structures, stiffness increases with a decrease in thickness coefficient and length coefficient, while in the case of PLA structures, stiffness increases with a decrease in length coefficient and height ratio. SEA is influenced by length coefficient and thickness coefficient in ABS and PLA structures, respectively. Based on the analysis, statistical non-linear quadratic models are developed to predict strength, stiffness and SEA. Optimal configuration of auxetic structure is determined to maximize strength, stiffness, SEA and minimize weight and time of fabrication.

The present study is limited to re-entrant type of auxetic structures made of ABS and PLA materials only under compressive loading. Also, results from the current study are valid within a selected range of gradient parameters. The findings of the present study are useful in the optimal selection of gradient parameters for the fabrication of auxetic structures of maximum strength, stiffness and SEA with minimum weight and time of fabrication. These outcomes have wide applications in domains such as automotive, aerospace, sports and marine sectors.

Limited literature is available on studying the influence of gradient parameters of ME manufactured auxetic structure of ABS and PLA materials on responses, namely, strength, stiffness and SEA under compressive loading. Also, no work has been reported on studying the influence of gradient parameters on mechanical properties, weight and time of fabrication of auxetic structures. The present study is an attempt to fulfil the above research gaps.

Fused deposition modelling (FDM) is the most economical additive manufacturing technique. The purpose of this paper is to describe a detailed review of this technique. Total 211 research papers published during the past 26 years, that is, from the year 1994 to 2019 are critically reviewed. Based on the literature review, research gaps are identified and the scope for future work is discussed.

Literature review in the domain of FDM is categorized into five sections – (i) process parameter optimization, (ii) environmental factors affecting the quality of printed parts, (iii) post-production finishing techniques to improve quality of parts, (iv) numerical simulation of process and (iv) recent advances in FDM. Summary of major research work in FDM is presented in tabular form.

Based on literature review, research gaps are identified and scope of future work in FDM along with roadmap is discussed.

In the present paper, literature related to chemical, electric and magnetic properties of FDM parts made up of various filament feedstock materials is not reviewed.

This is a comprehensive literature review in the domain of FDM focused on identifying the direction for future work to enhance the acceptability of FDM printed parts in industries.

Auxetic structures are one type of mechanical meta-materials mainly used for energy absorption applications because of their unique negative Poisson’s ratio. This study is focused on numerical and experimental investigations of fused deposition modeling (FDM) fabricated re-entrant auxetic structures of acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) materials under compressive loading. Influence of geometric parameters, namely, re-entrant angle, height and arm-length on strength, stiffness and specific energy absorption (SEA) of auxetic structures under compressive loading. Optimization of significant parameters is also performed to maximize these responses and minimize weight and time of fabrication. Further, efforts have also been made to develop predictive models for strength, stiffness and SEA of auxetic structures.

A full factorial design of experiment is used for planning experiments. Auxetic structures of ABS and PLA are fabricated by FDM technique of additive manufacturing within the constrained range of geometric parameters. Analysis of variance is performed to identify the influence of geometric parameters on responses. To optimize the geometric parameters Gray relational analysis is used. Deformation of auxetic structures is studied under compressive loading. A numerical investigation is also performed by building nonlinear finite element models of auxetic structures.

From the analysis of results, it is found that re-entrant angle, height and arm-length with their interactions are significant parameters influencing responses, namely, strength, stiffness and SEA of the auxetic structures of ABS and PLA materials. Based on the analysis, statistical nonlinear quadratic models are developed to predict these responses. Optimal configurations of auxetic structure of ABS and PLA are determined to maximize strength, stiffness, SEA and minimize weight and time of fabrication. From the study of deformation of auxetic structures, it is found that ABS structures have higher energy absorption, whereas PLA structures have better stiffness. Results of finite element analysis (FEA) are found in good agreement with experimental results.

The present study is limited to re-entrant type of auxetic structures of ABS and PLA materials only under compressive loading. Also, results from the present study are valid within the selected range of geometric parameters. The findings of the present study are useful in maximizing strength, stiffness and SEA of auxetic structures that have wide applications in the automotive, aerospace, sports and marine sector.

No literature is available on studying the influence of geometric parameters, namely, re-entrant angle, height and arm-length of auxetic structure on strength, stiffness and SEA under compressive loading. Also, a comparative study of feedstock materials, namely, ABS and PLA, is also not reported. The present work attempts to fulfill the above research gaps.